-14-
128-6117
14 of 16
Aux Video 2
The second video input may be connected to a DVD
player, video game system, or other audio/video input.
To play the Video 2 source, turn the VOH704 on and
press the source button on the VOH704 or the TV/
Video button on the remote control until “Video 2” is
displayed on the screen. Turn the source component
on with its power button or remote control. The
VOH704 is now ready to play the audio and video
signals from the source connected to video 2 inputs.
Audiovox Video Cassette Player (Aux Video 1)
In most installations a VCP will be connected to the
“Video 1” input. To view a video cassette, turn the
VOH704 On and press the source button on its control
panel or the TV / Video button on the remote control
until “Video 1” is displayed on the screen. The VCP
may also be operated with the remote or the buttons
Wired FM Modulator
Your video system may be equipped with an RF
modulator, that allows you to listen to the VOH704’s
video audio signal by tuning your vehicle’s radio to
the selected frequency, (88.7 or 89.1 - Check with
your installer) and turning on the remote mounted
RF modulator switch. (In most cases this toggle
switch will be located underneath the driver’s side of
the dash, check with your installer for the exact
location.) Whenever the RF modulator is on,
broadcast radio reception of the vehicle’s radio will
be diminished. Setting the remote mounted toggle
switch off will allow normal radio reception.
Video Output
The VOH704 provides a video output for an optional
video monitor(s). (Refer to page 7 of the installation
guide for more details.) This output will provide a
video signal that duplicates the signal displayed by
the VOH704 to an additional monitor or video display.
Please see your installer for more information.
on its face. The VOH704 is now ready to play the
audio and video signals from the VCP if it is connected
to the “Video 1” input. Inserting a tape into the VCP
will turn it on and automatically activate the play mode.
If a rewound tape had already been loaded into the
VCP, prior to its activation press play on the VCP or
on the remote control to view the tape. For more
information see the operator’s manual accompanying
your VCP.
