22
Adjustable Parameters
While in DVD or TUNER mode, the only parameter that can be adjusted is brightness
(BRIGHT). To access “PICTURE”, “COLOR”, ”CONTRAST”, and “TINT” you must be in
AUX or CAMERA mode.
NOTE:
The default adjustment is “0” in PAL mode. Tint is unavailable for adjustment.
Parameter Adjustment Procedure
1. Enter Picture Quality Setting mode:
Press the
PIC
button (24) on the remote or press and hold the
DISP/PIC
button (13)
on the unit.
2. Select Item to Set:
Press the (
) (II
) buttons (14, 22) on the remote or press and hold the (
) or (
) but-
tons (18, 19) on the monitor panel.
3. Set Parameters:
Press (
) (
) buttons (17, 19) on the remote or press (
) (
) buttons (8, 9) on the
unit.
4. Exit Picture Quality Setting Mode:
Press the
PIC
button (24) on the remote or press and hold the
DISP/PIC
button (13)
on the monitor panel.
Parking Brake Inhibit
• When the “PRK SW” cable is connected to the brake switch, the display on the TFT
monitor will display video only when the vehicle is applied.
• Parking brake function is overridden when the video source is set to CAMERA.
• When the parking brake inhibit is active, the front monitor displays “Parking Is On”,
preventing the driver from watching content while driving. Rear video screens are not
affected.
Monitor Movement Mechanism
If an obstruction occurs in the monitor path, the motion will stop automatically to pre-
vent damage to the mechanism or monitor.
Normal operation is resumed by pressing the
OPEN
button (12) or disconnecting and
reconnecting the power.
