Audiovox VME 9425, Руководство пользователя, Страница: 78 / 192

78
System Reset
To correct a system halt or other illegal operation, use the tip of a pen to press the reset
button located on the front bottom-left corner of the unit behind the protecti
Y e co Y er After a
system reset, the unit restores all factory default settings
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset
is complete.
Image/Display Settings
Video Output Modes
The follo Z ing table sho Z s the Y ideo output mode for each playing source
Video Output Modes
Playing Source Video Output Modes
AM/FM TUNER RGB Mode
DVD YCbCr Mode
AUX IN CVBS Mode
*CVBS – Composite Video Baseband Signal
Picture Adjustment
To adjust monitor display settings, perform the follo Z ing steps:
1 Press and hold the NAV button on the monitor to display the picture adjustment menu
The “BRIGHT” bar is highlighted in yello Z
2 Turn the rotary encoder to adjust the brightness setting le Y el
3 Press and hold the NAV button again The “CONTRAST” bar is highlighted in yello Z
4 Turn the rotary encoder to adjust the contrast setting le Y el
Press and hold the NAV button again to e [ it the picture adjustment menu
Parking Brake Inhibit
When the pink “Parking” Z ire is connected to the Y ehicle Parking Brake circuit, the front
TFT monitor Z ill display Y ideo Z hen the Parking Brake is engaged (When the pink Z ire is
grounded Y ia the Parking Brake circuit, Y ideo Z ill be displayed )