Audiovox VME 8013 - Скачать руководство пользователя

Страница: 9 / 23

Menu Operation

Press and hold the

VOL/SEL/MENU

button for more than two seconds to access the menu. Press the

VOL/SEL/MENU

button to move through the

following menu options: Equalizer, Loud Set, Beep Set, 12/24 Mode (clock), AF, TA, Region, TA Set, Retune, Mirror Image, Vol Mode, A-VOL, Sub
LPF and Area Set. The following procedures assume you have already accessed the menu.

Equalizer

The Equalizer function applies preset sound effects to the unit’s audio output signal. Turn the rotary encoder to select from the following equalizer
options: “Off”, “Rock”, “Hip Hop”, “Dance” and “Acoustic”. With the equalizer function activated, if bass or treble is adjusted, the EQ Mode will revert
to“Off”.
When the equalizer function is activated, the most recently selected bass/ treble levels cannot be adjusted. When the equalizer function is not
active, the unit will return to the most recently selected bass and treble levels.

Loud Set

When listening to music at low volumes, this feature will selectively boost certain bass and treble frequencies. “Off” is the default setting. Turn the
rotary encoder to select “On”.

Beep Set

The beep tone feature allows the selection of an audible beep tone to be heard each time the menu is accessed. “On” is the default setting. Turn the
rotary encoder to select “Off”.

12/24 Mode

This option allows selection of a 12 hour or 24 hour clock format. “12 Hours” is the default setting. Turn the rotary encoder to change to the 24 hour
clock format.

AF / Region

See on page 11

TA mode

Rotate the knob to choose TA ALARM or TA SEEK mode. If the TA (Traffic Announcement) is turned on and there is no traffic program identification
code received in the specified time, no TA/ TP will display and either TA ALARM or TA SEEK will be activated. TA ALARM mode : Alarm is turned
on. TA SEEK mode: TA SEEK is automatically activated.

RETUNE mode

Rotate the control to choose RETUNE-S or RETUNE- L. RETUNE-S or RETUNE-L is time length selection of TA SEEK retune interval.
RETUNE-S: Short, TA SEEK Retune interval is 45 seconds RETUNE-L: Long, TA SEEK Retune interval is 180
seconds. REMARK: RETUNE mode functions for TA during TA SEEK mode only.

TA-VOL

Rotate the knob to choose TA-VOL (TA=Traffic Announcement) level.

VOL - MODE

Rotate knob to choose VOL LAST, the turn-on volume level is the volume level of latest power off. Rotate knob to choose VOL ADJ, then rotate the
knob to set the turn-on volume level .

Mirror Image

This option allows for selection of a mirror image view when a rear view backup camera (sold separately) is connected to the CAMERA IN input on
the back of the radio. Turn the rotary encoder to select “On” or “Off”.
Vol Mode
Turn the rotary encoder to select “Last” or “Adjust”.
• Last: When the unit is turned on, the volume will resume at the level selected when last turned off.
• Adjust: If choosing “Adjust”, use the A-VOL setting to specify a turn-on volume.

Turn-On Volume (A-VOL)

After selecting “Adjust” for Vol Mode, press the

VOL/SEL/MENU

button to access the A-VOL setting and then turn the rotary encoder to select the

desired turn-on volume level. When this option is selected, the unit will revert to the adjusted volume each time the unit is turned on.

Sub LPF (Low Pass Frequency)

After connecting a subwoofer to the back of the unit, turn the rotary encoder to select a crossover frequency: OFF, 80, 120 or 160Hz.

Area Set

This option allows you to select the appropriate frequency spacing for your area. “U.S.A.” is the default setting. Turn the rotary encoder to select
“EUROPE”. The unit will turn off and reset when the Area is changed.

Clock Set

1. Press and hold the

DISP

button until the clock blinks.

2. Turn the

VOL/SEL/MENU

rotary encoder to set the minutes.

3. Press the

VOL/SEL/MENU

button to confirm and move to the hour field.

4. Turn the

VOL/SEL/MENU