Audiovox VME 8013 -, Руководство пользователя

Страница: 10 / 23

10
Subject to technical changes
Reset Button
The RESET button is located behind the front panel and can only be accessed with the front panel opened. Resetting the unit will erase the time and
preset memories. It should only be activated upon initial installation
after all wiring is complete, or if there is a malfunction of any of the switches on the unit. In these circumstances, pressing the
RESET button will clear
the system and return the unit to default operation.
RADIO OPERATION
Accessing Radio Mode
Press the SRC button on the front panel or remote control to switch to the RADIO source.
The following pictures discribe the Radio surface and her indicators.
1. Stereo Reception Indicator
2. Radio Station Frequency
3. AM/FM Band
4. Time/Clock
5. RDS Information
6. Current Preset Channels
Select a Band
Press the BAND button to change between three FM and two AM bands. Each band stores up to six preset stations.
Tuning
Seek Tuning
Press the TUNE/TRACK >>| or |<< buttons to seek the next/previous station automatically.
Manual Tuning
Press and hold the TUNE/TRACK >>| or |<< buttons to enter Manual tuning mode. Press the buttons again to move the radio frequency number up
or down one step.
Program Information
To view available program information, press the PTY button on the control panel. Press repeatedly to choose between Program Type (PTY)
category, Program Service station call letters (PS), and Radio Text (RT).
PTY Search
To view the Program Type categories, press and hold the PTY button on the control panel. Program type categories are listed, allowing listeners
to find similar programming by genre. Press the TUNE/TRACK >>| or |<< buttons to select a category. After a few seconds, the radio will start
scanning for stations broadcasting in the selected category.
DN UP
DIM
EON ST AF TA TP PTY
PTY : none
7. Source Indicator
8. PTY Indicator
9. EON Indicator
10. AF Indicator
11. TA Indicator
12. TP Indicator