128-8794
18 of 24
Page 18
Note this feature must be activated at the vehicle at the prescribed time. Once
activated at the vehicle, you can toggle the feature on by simultaneously
pressing the Lock + Option buttons of the transmitter. The 24 hour icon will
appear and the transmitter will emit a tone confirming the feature is active.
NOTE:
The unit will start once and run for the prescribed time. If you require
more frequent starting please refer to auto start up timer mode shown
earlier in this guide.
NOTE:
To insure accurate 24 Hour Start up, it is advisable to reset the start time
periodically as time may drift slightly each day.
Timing Count Down:
The unit offers an additional count down timer for situations where an
alert tone may be needed to remind you of something important. For
instance you may have a meeting 4 hours from now and you want a
reminder in 3 Hrs and 45 Mins. This additional count down timer allows
you to set the count down up 19 Hours and 59 Minutes from the current time
and when the timer reaches zero, the transmitter will emit a tone or vibrate
dependent on your preferred setting. See chart for setting the count down time
for this feature.
Valet:
When the System is in the valet mode, the icon shown will show
in the display when the status check buttons are activated.
Parking Meter Counter:
The transmitter has a built in clock that can count down from 10, 20, 30, 60, 90,
or 120 minutes. This feature is useful when parking the vehicle in a metered
parking lot. If the time on the parking meter is 30 minutes, you can set the count
down timer to 20 minutes. The transmitter will emit a beep tone when the timer
expires to remind you to get back to your vehicle. See following chart for setting
the parking meter count down timer feature.
Alarm Clock Mode:
The transmitter has a built in alarm clock that can be set to beep at a
certain time each day. The alarm clock mode must be set, and the
feature turned on. To use this feature please refer to the following
chart.
NOTE:
Your system is shipped with two transmitters, 1 two way,
shown on the left and the one way transmitter, shown
right. The one and two way transmitters are
programmed from the factory with separate lock and
unlock buttons, the trunk/key icon button operates
remote start and remote trunk release where
applicable. The option button and any button
combination may be programmed to operate various
options. Consult your installation center for button
programming and options that may have been
added to your vehicle. Although this is the default
programming from the factory, this can be changed
for you to any configuration you prefer. Please refer to
the transmitter program guides included with your kit.
NOTE
: A maximum of two of either style transmitter may be
programmed to your unit.
