Audiovox PRO-9649a Скачать руководство пользователя страница 8

128-6614

8 of 10

Page 8

defective zone indicator will always operate. Since these are important warnings to
you that something has happened, they cannot be eliminated.

REMOTE PANIC OPERATION

The ARM or DISARM button on your keychain transmitter also functions as a panic switch for
use in emergency situations. To use remote panic,

1. Press and hold the ARM or DISARM button on the keychain transmitter for 3 or more

seconds. The alarm will immediately sound.

2. To stop the alarm, press and hold the ARM or DISARM button on the transmitter again for 3

seconds. If the button is not pressed, the alarm will automatically stop after 30 seconds.
Also if any transmitter button other than the ARM or DISARM button is pressed and
released, the Panic mode will be turned off immediately. The normal function of this
transmitter button will be suspended during the Panic sounding period.

3. During the panic mode, the Lock and Unlock buttons can be used to lock and unlock the

doors, (if the option is installed), however once the unlock/disarm button is pressed, the
vehicle's starter inhibit device, (where installed) will be disabled allowing the vehicle to
start.

NOTE:

While in the Panic mode, pressing and releasing the ARM or DISARM buttons will,  if
the option is installed, lock and unlock the doors respectively.  While in the panic mode,
anytime the DISARM button is pressed, the panic feature will continue for the allotted
30 seconds, however, the security system will be disarmed allowing the vehicle to
start.

ADDITIONAL REMOTE FUNCTION ( CHANNEL 3 )

This security system has an additional features that can be connected to a number of
different optional accessories.  Some of the more common uses for this  channel are;

o

 Remote Trunk Release

o

 Remote Car Starter

o

 Remote Window Closure

o

 Remote Garage Door Interface

Operation of the optional accessory or accessories, can be controlled by pressing and
holding the programmed button on the keychain transmitter for four seconds, or by pressing
and releasing the programmed button on the transmitter two times in succession.  Check
with your installation center for more information on what accessories were installed and
how they are accessed.

ADDITIONAL REMOTE FUNCTION ( CHANNEL 4 )

This security system has an additional feature that can be connected to a number of differ-
ent optional accessories.  Some of the more common uses for this channel are;

o

 Remote Trunk Release

o

 Remote Car Starter

o

 Remote Window Closure

o

 Remote Garage Door Interface

To activate the optional accessory, press the programmed button on the keychain transmitter
for up to 8 seconds for continuous output, or press and release for momentary activation.
The optional accessory will immediately engage.  Check with your installation center for
more information on the optional accessory that may have been installed and how it is
accessed.

Содержание PRO-9649a











Отзывы: