-3-
audio level positions into memories which can be easily recalled.
To set any of the 3 audio memories, use the following procedure:
1. Use the Select button
3
and Level Control
2
to adjust the volume,
treble, bass, balance and fader to the desired settings.
2. Press the Select button
3
to call any of the audio functions on
the display. Within 2 seconds of pressing the Select button and
while the audio function is still on the display panel, press the
pre-set button (1 through 3) to be set and continue to hold it in.
After approximately 2 seconds, the volume will be momentarily
muted and the pre-set number (“P-1”, “P-2”, or “P-3”) will appear
on the display panel indicating that the audio levels are now set
into that memory position (release the button). The settings
can be recalled at any time by pressing the Select button
3
and then that pre-set button within 2 seconds.
bl
DIGITAL SOUND PROCESSOR (DSP)
The Digital Sound Processor feature adjusts the frequency response
and reverberation effects, allowing you to tailor the sound reproduction
to 3 different acoustic settings. Each press of the button will
select a different effect (
LIVE
,
CONCERT
or
THEATER
) as
shown by the indication on the display panel. Pressing the
button again will restore normal stereo reproduction (
DSP
and
effect mode indication will disappear from the display panel).
bm
AUDIO MUTE (M)
This button is used to mute the volume from the system. By
pressing the button, the indication “MUTE” will appear on the display
panel and the volume will be muted. Pressing the Mute button
again or activating any other function of the unit will return to the
volume level setting in use before the Mute function was activated.
bn
AM/FM BAND SELECTOR (BAND)
During radio operation, each momentary press of this button will
change the radio band. The indication “AM1”, “AM2”, “FM1”, “FM2”,
or “FM3” will appear on the display panel according to your selection.
During CD, CD changer or AUX input operation, pressing this
button will have no effect. Press the Mode Selector
bt
to return to
radio mode and then press the Band Selector.
bo
MANUAL UP/DOWN TUNING (
/
)
AUTOMATIC SEEK TUNING
Each time the button is tapped upward, the radio will tune one
frequency step higher. Similarly, each tap of the button downward
will tune one frequency step lower. To manually tune in a station,
tap the button in the appropriate direction until the desired
frequency is reached.
Moving the button upward or downward for longer than 0.5 seconds
and then releasing will activate the Automatic Seek Tuning
function. The radio will seek the next available station in the
selected direction and stop at that frequency. The Seek function
can be stopped by moving the button again or activating any other
tuning function.
Moving and holding the button upward or downward for longer than
0.5 seconds will cause the radio to continue tuning rapidly in the
selected direction until the button is released at which point it will
seek to the next available station.
bp
AUTO-STORE TUNING (AS)
PRE-SET SCAN TUNING (PS)
During radio operation, press this button momentarily to scan the
6 stations pre-set into the memories of that band. The unit will
stop at each pre-set station for 5 seconds before continuing to the
