128-6266
6 of 16
-6-
and two beeps will sound, indicating that the station is now
set into that preset memory position. The station can now
be recalled at any time by pressing that button.
4. Repeat the above procedure for the remaining 5 pre-sets on
that band and for the other 4 bands on the unit.
br
VACUUM FLUORESCENT DISPLAY (VFD)
The Vacuum Fluorescent Display (VFD) panel displays the
frequency, time, and activated functions using one of three
illumination levels as selected by the PWR/ILL button
1
.
bs
POWER LEVEL METER DISPLAY
This display consists of a left and right five-bar graph and a center
graph which provides a visual representation of the volume level
and the left and right channel audio signal levels. The volume level
is represented by the two outer bar graphs. As the volume is
increased, the number of illuminated segments will increase. The
left and right channels are represented by the three inner and center
bar graphs whose illuminated segments increase and decrease as
a function of the signal strength applied to the left and right channels.
As the signal increases, the number of illuminated segments will
increase and vice-versa.
bt
MODE SELECTOR (MODE)
This button is used to select the radio, CD player or CD changer (if
installed) playback mode. Each press of the button will select a
different mode as indicated on the display panel.
During CD player operation, this button may be used to change to
radio, CD player or CD changer mode without ejecting the disc.
The DISC indication will remain on the display panel to show that
the CD changer is operating. Press the button again to return to
CD player mode and resume play of the disc from the point at
which it was stopped.
bu
DISC SLOT
With the front panel in the fold-down position, gently insert the disc
into the slot (label surface facing up) until the soft-loading mechanism
engages and pulls the disc in. The LOAD indication will momentarily
appear on the display panel followed by the total playing time of
the disc. The
indication illuminates and becomes animated,
the
symbol lights, and the track number and elapsed time will
appear on the display panel.
CAUTION: This unit is designed for play of standard 5" (12cm)
compact discs ONLY. Do not attempt to use 3" (8cm)
CD-Singles in this unit, either with or without an adapter,
as damage to the player and/or disc can occur. Such
damage will not be covered by the Warranty on this
product.
cl
TRACK SELECT (
/
)
The Track Select function of the TUNE/SEEK/TRACK buttons are
used to quickly access the beginning of a particular track when a
disc is in play. Each time the Forward TRACK Select (
) side of
the button is pressed, the next higher track number will be selected
as shown on the display panel. Similarly, each time the Backward
TRACK Select (
) side of the button is pressed, the next lower
track number will be selected as shown on the display panel.
cm
CUE/REVIEW FUNCTIONS (
/
)
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue (
)
side of the button to advance rapidly in the forward direction
(theadvancing disc playing time will be shown on the display panel),
or the Review (
) button to advance rapidly in the backward
direction (the decreasing disc playing time will be shown on the
display panel). During either function, the elapsed time within each
track will automatically be shown on the display panel.
