-6-
cq
FRONT PANEL RELEASE BUTTON
This knob is used to release the mechanism that holds the front
panel to the chassis. To detach the front panel, press the button
so that the left side of the panel is released. Grasp the released
side and pull it off of the chassis. To re-attach the panel, position
the right side of the panel in place first and then press the left
side of the panel until the mechanism locks it into place.
NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is right-side-up when attaching
it to the chassis as it cannot be attached when up-side
down.
2. Do not press very hard on the front panel when attaching it
to the chassis. No more than light to moderate pressure
should be needed.
3. When attaching the front panel, make sure the right side is
correctly engaged before pressing the left side to lock it
into position.
4. When taking the front panel with you, please use the sup-
plied carrying case to protect the panel from dirt and dam-
age. Make sure there is no dust or dirt on the electrical
terminals or optical sensor lenses on the back of the panel
as this could cause intermittent operation or other mal-
functions.
Release Button
ATTACHING THE FRONT PANEL
Engage right
side first
DETACHING THE FRONT PANEL
