-11-
52 BRIGHTNESS
IIIIIIIIIIIIIIIIIIIIIII
BRIGHTNESS 32
CONTRAST 32
COLOR 32
RESET
32 BRIGHTNESS
III IIIII IIIIIIII
BRIGHTNESS 32
CONTRAST 32
COLOR 32
TINT 00
RESET
32 BRIGHTNESS
III IIIII IIIIIIII
-9-
d) Highlight the SOURCE and press MENU button, OSD as below:
SOURCE
AV 1
AV 2
Then, you can use VOLUME- or buttons to select from AV1 or AV2. The Master
monitor can also operate the AV sources via the remote control sensor.
g) If you select PICTURE, OSD below:
NOTE
: In NTSC format, TINT is included. In PAL format,
the TINT is omitted.
NOTE:
The unit will automatically select NTSC/PAL according to the input signal format.
NTSC format :
PAL format :
In the above condition, if you highlight BRIGHTNESS and then press MENU button, OSD will
display as below :
Then you can use VOLUME- or buttons to adjust it.
j) The OSD will automatically disappear if no buttons are pressed for 4 seconds.
2) Press the PICTURE button (
on Slave monitor
) consecutively, OSD will show the picture quality
selection :- BRIGHTNESS, COLOR, CONTRAST and TINT, the shown item can then be ad-
justed by using the VOLUME - and buttons.
00 TINT
I
RESET
BRIGHTNESS 32
CONTRAST 32
COLOR 32
TINT 00
