CD CHANGER CONTROLS
Built into the radio are controls to operate an optional 10-disc or 6-disc CD
changer. Please check with your SPS/AUDIOVOX or PRESTIGE car stereo
specialist for recommendations of the models that will work with this radio.
Adjustments of the audio functions (volume, tone, balance, and fader) operate in
the same manner during CD changer play as they do for radio, CD, and cassette
play. The following controls will operate the CD changer when it is installed and
connected to this radio. Refer to the owner’s manual included with the CD
changer for instructions on installation and correct loading and use of the CD
magazine.
31) MODE SELECTOR (MODE)
With the CD changer connected to the unit, this button is used to select CD
changer operation. To choose CD changer mode, press the button until the
“DISC”, “TRACK”, and
indications appear on the display panel. Press the
Mode button again to change back to radio, CD player or tape operation.
32) and 33) DISC SELECT (DISC
) (
DISC)
These buttons are used to select the desired disc for play. To advance to a higher
number disc, press the “DISC
” button (32). To return to a lower number disc,
press the “DISC
” button (33). The number of the disc in play will be shown
on the display panel.
34) TRACK SELECT (
TRACK
)
This button is used to quickly select the beginning of a particular track. Tap the
Forward Track Select (
) side of the button or Backward Track Select (
)
side of the button to locate the desired track as shown by the track number on the
display panel.
35) CUE/REVIEW FUNCTIONS (
/
)
High-speed audible search to any section of the disc can be made by the Cue and
Review functions. Press and hold the Cue (
) side of the button to advance
rapidly in forward direction or Review (
) side of the button to advance rapidly
in the backward direction.
When the Cue (
) side of the button is held down and the end of the last track
on the disc is reached or the Review (
) side of the button is held down until
the beginning of the first track is reached, the unit will enter the Pause mode (
will flash on the display panel) until the button is released.
36) PAUSE SELECTOR (
)
Pressing this button will temporarily stop play of the disc (the
indication will
flash on the display panel). Press the button again to resume play of the disc from
the point at which it had stopped. Pause mode will also be canceled by activating
any other disc changer function.
8
