2. Select the first station to be pre-set using the Manual Up/Down or automatic
Seek Tuning Controls (10).
3. Press the pre-set button to be set and continue to hold it in. The volume will
be momentarily muted and the pre-set number will appear on the display
panel indicating that the station is now set into that memory position and can
be recalled at any time by pressing that pre-set button.
4. Repeat the above procedure to enter stations in the remaining 4 pre-set
memories on that band and the 5 memories on each of the other 2 bands of
the unit.
13) LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time, and
activated functions.
NOTE:
It is characteristic of LCD panels that, if subjected to cold
temperatures for an extended period of time, they may take longer to
illuminate than under normal conditions and the visibility of the numbers
may decrease. The LCD read-out will return to normal when the
temperature increases to a normal range.
14) CASSETTE DOOR
Hold the cassette door with the exposed tape edge to the right and insert it into
the cassette door. Depress fully until the cassette is engaged and begins
playing. When the cassette reaches the end of the side of the tape being played,
the unit will automatically change direction as shown by the arrow indication on
the display panel and play of the other side of the cassette will begin.
NOTE:
Observe cassette Cautions in the care and Maintenance section of
this manual.
15) FAST FORWARD BUTTON (FF)
Pushing the Fast Forward button will cause the tape to move rapidly in the
forward direction of play (the direction arrow on the display panel will flash during
this operation). To stop Fast Forward movement, lightly push the rewind button
(16) until the mechanism disengages and normal play resumes.
16) REWIND BUTTON (REW)
Pushing the Rewind button will cause the tape to move rapidly in the reverse
direction of play (the direction arrow on the display panel will flash during this
operation). To stop Rewind movement, lightly push the Fast Forward button (15)
until the mechanism disengages and normal play resumes.
17) PROGRAM SELECTOR
To manually reverse tape direction and play the other side (program) of the
cassette, lightly push both the Fast-Forward (15) and Rewind (16) buttons at the
same time. The change of program will be shown by the direction arrows on the
display panel.
4
