M-01334, Rev. B
Page 27
4.7.1
Installation
Remove the communication port cover from the EchoStar receiver, (see the compatibility matrix in
Appendix A, at the end of this manual for a list of compatible receivers), install the RS-232 interface
box and attach the mounting screws. Next attach the adapter cable to the conversion box via the 9-pin
connector. Attach the remaining end of the adapter cable to the DBS-4500 serial 9 pin connector (see
Figure 4-11). Installation is now complete. CruiseTV will automatically identify the EchoStar
receiver at power up.
* NOTE: Satellite receiver not included in EchoStar upgrade kit.
