OPERATING INSTRUCTIONS
NOTE:
Number in parenthesis (#) corresponds with “Identification of Controls / Connections” on page 1 of this
manual.
LIQUID CRYSTAL DISPLAY PANEL
The liquid crystal display (LCD) panel displays the frequency, time, and activated functions.
Note: It is a characteristic of LCD panels that if subjected to cold temperatures for an extended period of time, they
will take longer to illuminate than under normal conditions. In addition, the visibility on the numbers of the LCD may
slightly decrease. The LCD read out will return to normal when the temperature increases to a normal range.
TUNER
1) Turn power on by pushing the Power Switch Control Button (17).
2) Use the Source Selectors (18), select the AM /FM button.
3) Use the Speaker Selector Switch (13) to choose between speaker output, headphones, or both.
4) Use Tuning Up (1) or Down (2) buttons to select the station manually. Also, the Station Preset buttons can select
stations (this will be discussed later in the manual). Push either of the Seek buttons (1 or 2) to tune to the next
higher or lower active station.
5) Adjust Volume Control (17) to suit taste.
CASSETTE TAPE PLAYER
1) Turn power on by pushing the Power Switch/Volume Control button (17).
2) Use the Source Selectors (18), to select the TAPE button.
3) Use the Speaker Selector Switch (13) to choose between speaker output, headphones, or both.
4) Press the Cassette Eject button (12) to eject any cassettes that may already be in the player.
5) Insert a cassette into the Cassette Player (11).
6) The cassette will automatically play when inserted.
7) You may rewind or fast forward the cassette using the REW or F.F. buttons (10 and 9).
8) To change sides of the cassette, press the REW and F.F. buttons (10 and 9), simultaneously.
9) To eject the cassette, press the Cassette Eject button (12).
3
