background image

128-6601

2 of 4

Page 2

This Remote Start Upgrade unit  is designed to be added to an existing remote
control keyless entry system, or remote alarm system.

Because it is an upgrade unit it can be wired to operate from any unused button(s)
from your keychain transmitter. Please check with your installing dealer for  which
transmitter button is connected to your remote start unit and, if you require a
single, double, or sequential press of the button(s) to operate your system.

SAFETY (Red Handled ) CONTROL SWITCH
The control switch allows you to temporarily disable the remote starting function
of your Remote Start System.  To disable the unit, move the red handled control
switch to the off position.

The control switch also allows you to select between automatic 2 hour start up
or 4 hour start up when using the automatic start up timer mode.  The factory
preset start up time for this mode is every 4 hours.  To select between 2 or 4 hour
start up timer:

1. Begin with the control switch in the on position

2. Turn the ignition switch on then off

3. Within 10 seconds, move the control switch off, on, off, on (2 switch cycles) to

select a 2 hour start timer.  After 10 seconds expire, the parking lights will
flash 2 times confirming that the two hour start cycle is set.  Or, within 10
seconds  move  the  control switch off, on, off, on, off, on, off, on (4 switch cycles)
to select a 4 hour start timer. The parking lights will flash 4 times confirming that
the 4 hour start timer is set.

REMOTE STARTING THE VEHICLE
The System WILL NOT start the vehicle if any one of the following conditions
exists:

1. The Vehicle Hood Is Opened.

2. The Gear Selector Is In Any Gear Other Then Park.

3. The Brake Is Depressed.

4. The Safety Control Switch Is In The Off Position.

CAUTION!  Be certain that the vehicle is outdoors before using this or any remote
vehicle starting device.  A running engine produces dangerous carbon monox-
ide fumes which can be harmful or fatal if prolonged exposure occurs.  DO NOT
remote start the vehicle if the car is garaged.

Содержание AS 9075a

Страница 1: ... w Tach Signal Learning Circuitry w Two and Two Safety Shutdown Circuits wAlarm By Pass Outputs w Selectable Steady or Flashing Parking Lights for Run Indication w Selectable 10 or 15 Minute Run Time w Factory Keyless Upgrade Inputs AllowsStartingFromFactoryKeylessEntryUnit w 4 Auxiliary Outputs To Allow Control Of A Factory Alarm w Diesel Glow Plug Preheat Mode select CAUTION Be certain that the ...

Страница 2: ... To select between 2 or 4 hour start up timer 1 Begin with the control switch in the on position 2 Turn the ignition switch on then off 3 Within 10 seconds move the control switch off on off on 2 switch cycles to select a 2 hour start timer After 10 seconds expire the parking lights will flash 2 times confirming that the two hour start cycle is set Or within 10 seconds move the control switch off ...

Страница 3: ... will continue to run on it s own power NOTE The engine will stop running before the expiration of the pre pro grammed run timer if you complete any of the following 1 Pressing the proper button or buttons of your keychain transmitter while run ning under control of the remote start system will turn the vehicle off 2 Depress the brake pedal 3 Open the hood 4 Move the red handled control switch to ...

Страница 4: ...rans mitter To do this 1 Start the vehicle using the keychain transmitter by pressing and releasing the remote start transmitter button s 2 Shut off the vehicle using the keychain transmitter by pressing and releasing the remote start transmitter button s 3 Within 10 seconds of step 2 activate the RF start command two times The parking lights will flash 4 times indicating the timed start mode is a...

Отзывы: