cp
REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the
play of the selected track (RPT will appear on
the display panel). Play of the track will continue
to repeat until the button is pressed again and
the RPT indication disappears from the display
panel. Repeat Play mode will also be canceled
by activating the Scan
co
, Random Play
cq
, or
TOP
cn
functions.
cq
RANDOM PLAY SELECTOR (RND)
During disc play, press this button to play the
tracks on the disc in a random shuffled order
(RND will appear on the display panel). In
Random Play mode, the Track Select function
cl
will also select tracks in the random order
instead of the normal progression. The Random
play mode can be canceled by pressing the
button again (RND indication will disappear from
the display panel) or by activationg the Repeat
Play
cp
, Scan
co
, or TOP
cn
functions.
cr
DISC SELECT UP/DOWN (CD+/CD-)
During CD changer operation, these buttons are
used to select the desired disc for play. Refer
to the section describing CD Changer Controls.
cs
DISC EJECT ( )
Disc play is stopped and the disc is ejected
when the EJECT ( ) button is pressed (EJECT
appears on the display). Radio or CD changer
operation will automatically resume. If the disc
is not removed from the unit within 15 seconds
of being ejected, it will automatically be re-loaded
into the unit to prevent it from being accidentally
damaged (DISC IN will appear on the display
panel to indicate that a disc is loaded in the
player). Play of the disc can be resumed by
using the MODE button
bt
to choose the CD
player function.
13
ct
TIME/FREQUENCY SELECTOR (T/F)
During radio operation, press this button to call
the time display on the incorporated quartz clock.
The display will return to the radio frequency or
disc play elapsed time indication after 5 seconds
if the time is not being re-set.
cu
EQUALIZER BUTTON (EQ)
The EQ button applies preset sound effects to
the unit’s audio output signal. The EQ
button,when pressed, will activate one of four
operating modes (no equalization, ROCK,
CLAS, or POP). When the EQ function is active,
the bass and treble levels cannot be changed.
When the EQ function is not active, the unit
returns to the user set bass and treble levels.
dl
THEFT-DETERRENT LED
Located on the chassis behind the front panel,
a light-emitting diode (LED) will flash when the
panel is removed. The flashing light serves as
a visual warning to the would-be thief that the
unit has been disabled by removal of the front
panel.
dm
RESET BUTTON
A RESET button is also accessible when the
front panel is removed, and can be used to
activate the reset circuitry. However, this feature
should only be used under the following
circumstances as it will erase the time and
pre-set memories:
1. Upon initial installation after all wiring is
completed.
2. If there is a malfunction of any of the switches,
on the unit, pressing the RESET button may
clear the system and permit a return to normal
operation.
OPER
A
T
ING INSTRUC
T
IONS
