SET
SET
SET
SET
SET T
TT
TT ING THE CLOCK
ING THE CLOCK
ING THE CLOCK
ING THE CLOCK
ING THE CLOCK
1. Switch the vehicle ignition and radio “on”.
2. Press the Time/Frequency button to call the time display.
3. Press and hold the Time/Frequency Selector button
cq
with the time displayed.
The entire time display will blink.
4. Rotate the AUDIO ADJUST control clockwise in the VOL DN direction to adjust
the hours and AM/PM indication, and counter-clockwise in the VOL UP direction
to adjust the minutes to the correct time.
5. Five seconds after the last hour or minute adjustment is made, the time will be set
in the unit and the display will return to the normal indication.
*SPECIFICATIONS
*SPECIFICATIONS
*SPECIFICATIONS
*SPECIFICATIONS
*SPECIFICATIONS
Size:
7" W
x
2" H
x
6" D
178mm x 50mm x 150mm
Operating Voltage:
12 Volts DC, Negative Ground
Output Power:
60 Watts Maximum (15 Watts x 4 Channels)
Output Wiring:
Floating-Ground Type Designed for 4-Speaker Use
Output Impedance:
Compatible with 4-8 Ohm Speakers
Tuning Range:
AM: 540 - 1,710 kHz
FM: 88 - 108 MHz
Sensitivity:
AM: 15 uV
FM: 2.5uV
FM Stereo Separation:
30 dB
Tape Frequency Response:
50 - 10,000 Hz
Tape S/N Ratio:
50 dB
Wow & Flutter:
0.15% VRMS
*Specifications are subject to change without notice.
ECIFICATIO
SPECIFICAT
SET
T
ING THE CLOCK / SPECIFICA
T
IONS
11
11
11
11
11
