background image

-7-

DETACHING THE FRONT PANEL

ATTACHING THE FRONT PANEL

1. Make sure the front panel is right-side-up when attaching it to
the chassis as it cannot be attached when up-side down.

2. Do not press very hard on the front panel when attaching it

to the chassis.  No more than light to moderate pressure
should be needed.

3. When attaching the front panel, make sure the right side is

correctly engaged before pressing the left side to lock it into
position.

4. When taking the front panel with you, please use the supplied

carrying case to protect the panel from dirt and damage.
Make sure there is no dust or dirt on the electrical terminals
on the back of the panel as this could cause intermittent
operation or other malfunctions.

NOTES ON USE OF FRONT PANEL

1. Switch the vehicle ignition and radio “on”.
2. If necessary, momentarily press the Time/Frequency Selector button 

cp

 so that the time is shown on the display panel.

3. Press and hold the Time/Frequency Selector until the time display begins flashing.  While the display is still flashing, press the Down

Tuning (

) button to adjust the hours and then the Up Tuning (

) button to adjust the minutes to the correct time.

4. Five seconds after the last hour or minute adjustment is made, the time will be set in the unit and the display will return to the normal

indication.

Release Button

Engage right
side first

SETTING THE CLOCK

Содержание 1285739














Отзывы: