SUNILDA
ultra highend phono tube amplifier____________________________
The two middle rotary knobs select low impedances for MC systems in the first five switch
positions starting from the left. The last position at the very right of these switches has a
47kOhm load and is intended for use with MM systems.
So for MC systems chose the impedances 47 R up to 1 k in the first five switch positions and select the
impedance in the sixth switch position (MM – 47k), if a MM system has been connected to this
input.
According to your requests all switch positions may be combined in any order thus allowing the
simulation of a large number of different loads for your pick-ups.
Note:
Always turn down the volume at the pre-amplifier to safeguard your speakers when changing the
following settings at SUNILDA:
1)
When switching over from one input to another input.
2)
When switching from MM to MC, because the amplification increases by 20dB.
A view of the compact and absolute wireless electronic - riaa modul from SUNILDA. There is no hum, bee
or any noise - only music. The design on a double side pc board is constructed in double mono
technology, use best and selected components and guarantee high stable and highend vinyl re -
productions.
