Audiovalve ASSISTENT 100 Mark 2, Руководство пользователя

Страница: 7 / 18

Assistent 100 – Mark 2 integrated tube amplifier_ ___________
therefore capable of generating a moderately high temperature which requires care full
placing to aviod any effect this heat may have on other equipment, furniture and fittings
etc.
Do not remove the top cover from this amplifier.
Hazardous voltages are present. Any repair work should
be refer to a suitable qualified and experienced
service person.
Do not attempt to connect any input of this amplifier to
any of its outputs.
Do not earth any output terminal or connect any of these
terminals together without following the instructions in
this manual or seeking qualified assistance.
Do not place this amplifier in any position where liquids
or any foreign material may accidentally enter it.
Do not disconnect any in / output wire, the power cord or the connecting cables between
the amp and the power supply , while the amplifier is operating.
Some preamplifiers, processor, CD players etc produce
large switching pulses when switched on or off, causing a loud
click through the loudspeakers. For this reason, turn off your power amplifier at first
when you plan to switch off your audio device .
Turn on your power amplifier at last when you plan to switch on your audio
device .
All handling at the open amplifier has to be done
when the main power plug is disconnected .
Please notice that you never exceed the mains voltage in the prescribed value shown at
the lable of the serial number on the rear side. If you can`t provide the amplifier with the
exact shown main voltage, please use a voltage stabilizer - particulare for the US ( 115
VAC ) market and Mainland China
The amplifier needs a certain time to form the brand new components (capacitors)
otherwise they can be destroyed.
Use the Stand - By mode for warm hold periodes ( tube heating ) when you aren`t
listening. Please switch OFF the amp while leaving the house or sleeping !
Please only do use your amplifier while listening to music.