Audiovalve ASSISTENT 100 Mark 2, Руководство пользователя

Страница: 12 / 18

Assistent 100 – Mark 2 integrated tube amplifier_ ___________
REMOTE CONTROL
In case the remote doesn`t work or you replace the battery, please follow the
instructions:
- Make sure that the batteries are fitting tight at their place.
- On the back side of the remote through a little hole you can see a blue LED .Located on the PC
board of the remote.
- Now press at the same time the volume up and down button together, untill the LED flashes, then
stop doing so.
- If it flashes 1 time, the remote is for the CONDUCTOR
- 2 times for the EKLIPSE
- and 3 times for the ASSISTENT 50 and 100 .
- You can change the program of the remote by pressing the buttons of the volume, untill the LED
is flashing as much as you need to be the correct program.