Audiotricity CHIMERA, Руководство пользователя

Страница: 9 / 25

9
© AUDIOTRICITY 2014, ALL RIGHTS RESERVED
Six isolated Furutech FT-SDS power outlets
Each output power outlet is placed in an isolated power distribution branch, with independent
filters. It avoids any possible cross contamination between the plugged components, and allows
us to design specific filters to specific components and therefore get a better performance from
each component.
Hydraulic breaker
The common used thermal breakers or switches add extra resistance, and their performance
can be changed according to the temperature and the amount of current needed. By using
Hydraulic breakers, we can remove all these constraints without any side effect.
Anti-vibration spikes
The anti-vibration spikes reduces the mechanical vibration of the electrical components, allowing
an increase on the power conditioner performance and on all neighbor components.
Aluminum chassis
The Aluminum chassis massively reduces the possible absorption of the noise fields placed near
the power conditioner, and of the noise generated by the magnetic fields. Along with the use of
Anti-vibration spikes, the aluminum chassis also reduce the vibration.
32A Neutrik powerCON input
By using a 32A Neutrik input, the power conditioner is fed without any power constraint and with
all available current in the wall power outlet.
Central ground point
This provides a central ground point for all electronic components in the system; it normalizes
voltage differentials between component chassis’, which may reduce the ground loops, and it
also lowers chassis ground noise using dedicated ground filter.
DC blocker (optional)
We included a dedicated DC blocker to remove any DC current contamination that might exist in
the power line (it’s usually responsible for the typical humming in your speakers).