Audiotricity CHIMERA, Руководство пользователя

Страница: 16 / 25

16
E-MAIL: support@audiotricity-hifi.com www.audiotricity-hifi.com TELEPHONE (+351) 916 236 200 1600-238 LISBON, PORTUGAL
OWNER’S MANUAL CHIMERA SIGNATURE POWER CONDITIONER
OPERATION
Initial power-up of the conditioner
Your Chimera Signature power conditioner is shipped with a minimum 72h burn-in period
ensuring an outstanding performance right after it’s turned on. However, it’s performance will
continue to improve until the 300 hours of burn-in.
Every time you switch on Chimera Signature it requires approximately 30 minutes to reach
optimal operating temperature. Although the power conditioner will sound excellent upon initial
listening, the sound quality will improve as it warms up.
During operation
The Chimera Signature was designed to be always in operation even when you are not using
your system. You should only turn off the power conditioner if you won’t need it for a long period
of time or if it exists any operational problem.
The Chimera Signature power conditioner requires no adjustments during normal operation. If
there is no sound or the sound quality is in some way impaired, consult the “Troubleshooting”
section.
Protection Systems
The Chimera Signature power conditioner is equipped with magnetic breaker for protection
against excessive AC current draw. Unfortunately, since no protection circuitry or system
can completely protect a product from every electrical hazard, certain precautions should be
observed. In the event of severe voltage hazards such as lightning or when the power conditioner
will not be used for extended periods of time, the power conditioner should be unplugged from
the AC mains to avoid potential damage to the internal circuitry. All other audio/video system
components should also be disconnected from AC mains power as hazardous voltages can
easily travel throughout an interconnected system.