Audiotrak AUDIOTRAK Prodigy HD2, Руководство пользователя

Страница: 7 / 19

AUDIOTRAK Prodigy HD2
Figure 4. Removing the PCI Slot faceplate
If the PCI slot is covered by a faceplate, you can remove it by removing the screw holding it in
place or by prying it off with a screwdriver.
Insert the Prodigy HD2 card into the PCI slot, firmly pushing the card into the slot until it is seated
securely. Replace the screw, and tighten it.
Figure 5. Prodigy HD2 installed in a PCI slot
4. Close the computer case.
5. Software Installation
After completing the hardware installation, you need to install the Windows driver. The installation
steps in the different versions of Windows vary, but they are typically very similar.
Note:
Depending on your system, you may need the Windows installation CD.
7