Audiotrak AUDIOTRAK Prodigy HD2, Руководство пользователя

Страница: 17 / 19

AUDIOTRAK Prodigy HD2
17
9. Specifications
·
PCI audio interface based on VIA VT1721 (Envy24HT-S)
·
PCI card supplied with standard and low profile metal bracket
·
24 bit / 192kHz playback (analog & digital)
·
24 bit / 96kHz recording
·
high quality AKM AK4396 120dB(a) S/N ratio DA converter for extremly high quality 2 channel
audio playback via RCA output connectors (5Hz - 40kHz frequency response)
·
triple OpAmp design for audio output with three high quality Fairchild NE5532 OpAmps on
separate sockets (can be exchanged for tuning & customization)
·
headphone output with 1/8" connector routed via JRC4580 dual OpAmp
·
analog line input with 1/8" connector via AKM AK5353/7 102dB(a) S/N ratio AD converter
(20Hz - 40kHz frequency response)
·
optical S/PDIF digital output following IEC-958C standard, can be used for stereo audio playback
(PCM) and multichannel streams from such sources (AC-3 or DTS data)
·
EWDM driver for all current Windows Versions from pro audio manufacturer ESI
10. General Information
Trademarks
ESI, AUDIOTRAK, Prodigy, and Prodigy HD2 are trademarks of Ego Systems Inc., Gyrocom
C&C Co. Ltd., ESI Audiotechnik GmbH and RIDI multimedia GmbH. Windows is a trademark of
Microsoft Corporation. Other product and brand names are trademarks or registered trademarks of
their respective companies.
The FCC and CE Regulation Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions : (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Caution: Any
changes or modifications in construction of this device with are not expressly approved by the party
responsible for compliance, could void the user's authority to operate equipment.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense. If
necessary, consult an experienced radio/television technician for additional suggestions.
Correspondence
For technical support inquiries, contact your nearest dealer, local distributor or AUDIOTRAK
support online at www.audiotrak.net.