14
Connectors and control units
5
6
8
9
1
Subwoofer Output
Connector for a passive MATCH
PP subwoofer.
2
AUX Input
3,5 mm jack for an external audio source like
a MP3-player navigation device, etc.. This in-
put can either be activated automatically or
via an optional cable remote control.
3
System Connector
Connector for the MATCH cable harness.
Make sure that you only use the original ca-
ble that comes with the amplifier to connect
the PP 52DSP with your car radio.
4
Remote Output
The remote output has to be used to turn on/
off external amplifiers that are connected to
the RCA line outputs.
5
USB Input (slave only)
Connects the PP 52DSP to your pc.
6
Status LED
This LED indicates the operating mode of the
amplifier and which setup has been chosen.
7
Control pushbutton
Use this button to either switch between the
setups or initiate a reset of the device.
8
MicroSD card reader
MicroSD Card reader to copy vehicle specific
setups to the PP 52DSP.
9
Control Input
Multifunction interface for e.g. the optional
remote control URC 2A or other accessory.
10
MODE Switch
Allows modifying amplifier gain and subwoo
-
fer gain as well as functionality of the optional
remote control URC 2A.
11
Line Output
Line outputs for connecting external ampli-
fiers. Make sure that the „Remote Output” is
used to turn on these devices.
1
2
3
4
7
10
11
