Setting the Impedance Matching Switch
Set the switches to the same setting for all AE100VCs
connected to an amplifier regardless of the number of
speakers connected to each AE100VC.
Example:
Four audio zones, each with a pair of speakers
and a volume control, totals four speaker pairs. When wired
to your 8 Ohm amplifier, all AE100VC units should have all
switches set to X4 in this configuration.
Dimensions
2-3/8”
60mm
2-3/4”
70mm
Figure 1 illustrates the location of the switch which allows
the user to select impedance matching settings.
Multiple AE100VCs must be wired in parallel at the
receiver or amp output. We recommend using the
AudioSource AE6SW speaker selector to achieve
this with the additional benefit of being able to turn off
unused zones at the push of a button. Simply connect
the zone outputs of the speaker selector to the volume
controls in each of the zones. Use of speaker cable
smaller than 16 gauge is not recommended.
Figure 1
One Year Limited Warranty
AudioSource, a division of Peak Audio Group, LLC, warrants this product against defects in materials and workmanship for a limited period of time. For a period of one
(1) year from date of original purchase, we will repair or replace the product, at our option, without charge for parts. Customer must pay for all labor
charges associated with the removal and re-installation of this product for the limited period and all parts and labor charges after the limited warranty
period expires. The limited warranty period for factory refurbished products expires after ninety (90) days from date of original purchase. This limited
warranty applies only to purchases from authorized AudioSource Retailers or Distributors. This limited warranty is extended only to the original
purchaser and is valid only to consumers in the United States.
Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource Retailer or Distributor when making a claim
against this limited warranty. This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It
does not cover failures resulting from accident, fire, flood, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty installation, modification,
service by anyone other than AudioSource, or damage that is attributable to Acts of God. It does not cover costs of transportation to AudioSource or
damage in transit. The customer should return their defective product, freight prepaid and insured, to AudioSource only after receiving a Return Authorization.
Repair or replacement under the terms of this warranty does not extend the term of this warranty. Should a product prove to be defective in workmanship
or material, the consumer's sole remedies will be repair or replacement as provided under the terms of this warranty. If the defective product is
discontinued AudioSource may replace the product with an equivalent or superior product at its option. Under no circumstances shall AudioSource
be liable for loss or damage, direct, consequential or incidental, arising out of the use of or inability to use the product. There are no express warranties
other than described above.
Total Number of 8 ohm Speaker Pairs Connected to Amplifier or Receiver
1
2
3
4
5
6
7
8
1X
1X
1X
2X
4X
4X
8X
8X
8X
8X
Switch Settings for 8 ohm Amplifi ers or Receivers
Total Number of 8 ohm Speaker Pairs Connected to Amplifier or Receiver
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Switch Settings for 4 ohm Amplifiers
”6
1/
31-
2
m
m2
7
”2/
1-
4
m
m4
11
”8/
3-
1
m
m5
3
1 or 2X
8X
4X
8X
8X
8X
8X
8X
8X
8X
8X
4X
4X
4X
4X
2X
2X
