61)
Finally, we can test the master
speaker!
Set the volume to half.
Set the source to BT.
Connect the power supply.
Turn the power switch on.
You should see a green LED and hear a
‘beep, beep’ as the bluetooth module
starts to look for your device.
62)
Now we can assemble the slave
speaker. Repeat steps 50 – 57 .
The difference is the slave baffle does
not have a plug on the tweeter and
woofer wires.
•
Seal the port with silicon, the same as the
master speaker.
•
Cut acoustic foam, the same as the master
speaker.
•
Add glue to the baffle rebates and port edge,
the same as the master speaker.
•
Solder the woofer wires and thread them to the
back of the cabinet.
•
Screw the woofer in to the baffle.
No Plug
