Turn on dock by sliding the switch, located on the back of the dock, into the
mono or stereo position
You have successfully setup your Audiorange ITE-1000.
If you cannot hear any sound:
Watch this video:
audiorange.com/ite1000-no-sound
Increase the volume on your headphone
Increase the volume on the TV
If you followed Step 1a, check that your TV’s audio
settings are set to “Analog Audio Out (Fixed)”
If you followed Step 1b, check that your TV’s audio
format is set to “PCM”
Check that your TV’s audio settings are set to
external speaker
Remove the headphones from the dock. Switch the power to the on
position and confirm there is a blue light on the headset.
There are led indicators on the dock and headset. Under normal operation,
a solid blue light will be present on the dock and headset. The system has
additional light indicators. Here’s what they mean:
Left LED
Left LED
Right LED
Right LED
Flashing Blue
Standby mode.
From Step 1a
From Step 1b
Flashing Blue
No connection to the dock.
Solid Blue
Dock is transmitting audio to
headset(s).
Solid Blue
Headset is receiving audio from
the dock.
Solid Red
Microphone is on.
Solid Green
Confirms an analog connection from
step 1a.
Alternating Blue & Red
Standby mode & headsets are
charging.
Dock:
Headset
STEP 2
STEP 4
STEP 3
What the Lights Means
BACK OF DOCK
BACK OF DOCK
IMPORTANT: If you cannot
access your TV’s audio
settings, please refer to your
TV manual for help.
Analog Audio Out (Variable)
BitStream
Dolby
DTS
Analog Audio Out (Fixed)
PCM
