If you have any questions or concerns – please call AudioQuest at (949) 585-0111
or email: [email protected]
2
Step 1
Measure about 5.5” of cable. Using a sharp
blade or a jacket cutter, carefully strip back the
outer jacket and remove. This will expose the
two conductor wires and two fillers inside.
Step 4
Insert the Red wire into a red-stripe speaker
connector and tighten the connector’s screws
using a hex allen wrench. Insert the Black
wire into a black-stripe speaker connector and
tighten the connector’s screws using a hex allen
wrench.
Step 2
Using a wire cutter, remove the two thin black
fillers. Be careful not to cut the conductor wires.
Step 5
Ensure all connections are secure.
Step 3
Using a wire stripper, remove ½” of insulation
from each wire.
FLX 16-2 & FLX 14-2
