Page 6
ENGLISH
EQ215 - 2 x 15 bands stereo equalizer
[8] - RCA input
Used to receive an incoming signal.
[9] - Fuse
If need to change the fuse, replace it with one with
the exact same characteristics.
[10] - Main power socket
Connect here the supplied power cord.
Please make sure the voltage of your electrical outlet is
compatible with the Q215.
[11] - Voltage selector
This selector is protected by a lid and allows you to use
your device as a 220V or 110V unit. Please make sure
the voltage of your electrical outlet matches the voltage
indicated at the rear of the Q215.
5.2 - Connectors
8
12
13
14 15
9
10
11
[12] - Jack and XLR inputs
These sockets allow you to receive an incoming signal
and are compatible with balanced and unbalanced
signals.
- XLR : pin1 = ground ; pin2 = positive signal ; pin3 =
negative signal
- Jack : (in parallel to XLR sockets) - tip = positive
signal ; ring = negative signal ; body = ground
The input impedance is greater than 40K
.
[13] - Jack and XLR outputs
These sockets, wired as described above, allow you to
transmit a signal and are compatible with both unba-
lanced and balanced signals.
[14] - RCA output
Can be used simultaneously with the XLR or Jack
outputs.
[15] - Rec Out
Can be used simultaneously with the XLR, Jack or RCA
outputs. Its signal is identical to the RCA output.
