Page 5
ENGLISH
EQ215 - 2 x 15 bands stereo equalizer
5 - Panels description
[1] - Power switch
Turns the unit ON/OFF.
[2] - Power indicator
Lights up when the unit is turned ON.
[3] - IN/OUT button
This key, when pressed, bypasses the EQ section.
So you can easily compare the equalized sound and
original sound.
[4] - Frequency settings faders
Allow you configure the value of each frequency (+/-12
dB) Values are indicated above the faders, in Hertz (Hz).
[5] - Output gain control knob
Allows you to control the main gain of the Q215. These
settings are especially useful to compensate the volume
increase/decrease due to the modifications operated by
the Q215. Settings from -12 to +12 dB.
[6] LED volume viewmeter
These 4 LEDs indicate the volume output. Each LED
lights up when the signal has reached the correspon-
ding level (in dB). There is a high risk of saturation when
the +10 and +17 LEDs are activated.
[7] - Low Cut
Activates the built-in low-pass filter.
Affects all frequencies below 60Hz, with a -3dB slope.
2
4
5
3
7
6
1
5.1 - Front panel
