PREZONE444
- Multizone and rackable Mixer/Pre-amplifier with 8 inputs and 4 outputs
English
Page 9
6 - Connectors
Mono line-level inputs are accessible via Jack or RCA chassis and can receive both balanced and unbalanced signals.
These inputs can be connected to CD players, MP3 players, Tuners or cassette players.
When connecting unbalanced sources, you will be required to connect the ring to the body.
You can also use the RCA inputs to connect CD or MP3 players, etc.
CAUTION: Turn the volume of affected channels at their minimum before connecting line-level signals
to prevent serious damages to your amplification system.
6.1 - Microphone inputs
6.2 - Line-level inputs
The microphone inputs are accessible via XLR chassis and can receive both balanced and unbalanced low-level signals
Both low-impedance condenser and dynamic microphones can be connected (channels 1 to 4).
CAUTION: Connecting unbalanced sources while the phantom power supply is activated will cause
severe damages to your devices due to the voltage delivered via pins 2 and 3.
2 = Hotspot (+)
2
3
1
3 = Coldspot (-)
1 = Ground
Balanced
2 = Hotspot (+)
2
3
1
Shunt between
1 et 3 pins
1 = Ground
Unbalanced
Tip
Tip
Signal
Sleeve
Sleeve
Ground / Shield
Unbalanced TS
Ring
Ring
Coldspot (-)
Tip
Tip
Hotspot (+)
Sleeve
Sleeve
Ground / Shield
Balanced TRS
Ring
Tip
Tip
Hotspot (+)
Sleeve
Sleeve
Ground / Shield
Shunt between
ring and sleeve
Unbalanced TRS
Center
Signal
Sleeve
Ground / Shield
Unbalanced RCA