English
Page 20
CR25A-COMBO -
250W B
LUETOOH
®
SOUND
SYSTEM
WITH
USB/SD
PLAYER
AND
2
UHF
HANDHELD
MIC
4 - 5 : Master
4 - 6 : Power supply
D1
- MASTER volume control fader.
From minimum to maximum (clockwise). This fader affects the
main volume output.
D2
- POWER/LIMIT indicator. Indicates if the sound system is ON
and the limiter activated.
D3
- Treble control fader.
From -12 dB to + 12dB (clockwise). This fader affects the master
volume output.
D4
- Bass control fader.
From -12 dB to + 12dB (clockwise). This fader affects the master
volume output.
D5
- Echo control fader.
From 0 to 10 (clockwise). This fader affects the Echo level of the
microphones input.
D5
- Delay control fader.
From 0 to 10 (clockwise). This fader affects the Delay level of the microphones input.
D7
- LINE OUT output carrying the line-level main signal of each channel via stereo Jack 6.35.
Allows you to connect another amplified system.
E1
- Power plug.
Allows you to connect your sound system to an
electrical outlet and recharge its batteries and/or
turn it ON.
E2
- ON/OFF switch.
E3
- Fuse holder.
Please make sure to replace the fuse only with
the exact same model. Fuse: T5AL 250V
E4
- Input voltage selector. Allows you to switch
from 100-120V AC to 220-240V AC.
Please check the line voltage of your installation
before plugging the CR25A-COMBO.
E5
- Battery level indicator.
The batteries must be charged when the LOW
indicator is lit.
E6
- Charge level indicator.
Is lit in green when the batteries are charging.
1
3
2
4
5
6
5
4
6
7
1
3
2
