English
Page 23
CR25A-COMBO -
250W B
LUETOOH
®
SOUND
SYSTEM
WITH
USB/SD
PLAYER
AND
2
UHF
HANDHELD
MIC
4 - 8 : Optional headband transmitter system:
1
- Jack 3.5 input to connect the microphone
2
- Input level selector. MIC is the standard configuration for
the headband microphone. You can switch to the 0dB or -10dB
positions if you want to use another type of microphone.
3
- ON/STANDBY/OFF power switch. The middle position allows
you to cut the microphone without interrupting the HF signal.
4
- Battery level indicator.
The indicator flashes in red when the batteries are discharged.
The indicator flashes in red when the ASC function is activated.
5
- Flexible antenna.
6
- Synchronisation IR diode. The ASC (Auto Synchro
Connection) function allows you to synchronise a chosen
channel between the transmitting microphone and the receiver
via InfraRed transmission.
To do so, select a channel (from 1-16) on the receiver. Press the
ASC button and put the IR diode of your microphone in front of
the IR diode (#9) of the receive
7
- Batteries compartment: LR06 x 2. Please make sure you keep
the same polarities if need to replace the batteries.
1
- Connector to plug the bodypack transmitter.
Plug the headband microphone into the Jack #1
socket of the transmitter.
2
- Headband. Set the mic position in order for
the capsule to be slightly below your mouth.
3
- Capsule. Transforms the sound pressure into
a signal.
INPUT
MIC
-10dB
0dB
ON
OFF
STANDBY
ANT
1
2
3 5
4
1
3
2
6
7
