Audionet STERN, Руководство пользователя

Страница: 21 / 67

21
Note
•
To switch to the next or previous input channel by using the Audionet Metal
Remote Control, select an input channel by using the keys '
CH+ ' and ' CH- '
(refer to section 'Key assignment' on page 49).
Tip
•
If you are within one of the setup menus and would like to change the volume,
press the
Home
key first to get back to the main screen. Afterwards you are
able to use the rotary encoder to change the volume level.
•
Basically, the function
Home
is always assigned to the most left key beneath
the display.
6.8 Muting
While the STERN is in normal operating mode, press the
Mute
key on the front
panel to mute or un-mute the volume.
As well as during an input selection, the STERN uses 'soft' muting. The volume is
stepped down gently to -80 dB. Afterwards the outputs are switched off. The
displays second line informs on a muted unit with the text
mute
instead of the
volume value in dB.
To un-mute the STERN, press the
Mute
key again. The outputs are switched
back on and the volume is stepped up gently to its original level afterwards.
Note
•
You may of course select a different input channel as described above, while
the unit is muted. But the STERN will of course stay muted, until you push
the
Mute
key again to un-mute the unit.
•
If you turn the rotary encoder clockwise, i.e. you turn up the volume while
the unit is muted, the new volume level will be set and the unit is un-muted.
•
To control the muting of your STERN by the Audionet Metal Remote Con-
trol, use the
key (see section 'Key assignment' on page 49).