Audionet PRE, Руководство пользователя, Страница: 4 / 9

4
III) Operating the system
All functions of the PRE are completely microprocessor controlled.
This guarantees highest precision, exclusive functions, easy operation
and protection against operational faults.
For switching PRE on, please press the power button at the front
panel. PRE needs 10 sec. for waking up and then works. PRE will
come up softly.
To switch the PRE off, please press the power button again and the
PRE needs 10 sec. for going to sleep and then will remember all your
latest settings.
When switching on and off at the front panel or with the remote
control you do not have to care about your other systems.
To set the desired volume, please turn the magnetic buffered volume
knob at the front panel. This is an incremental impulse unit without a
stop.
Please turn clockwise if higher and counterclockwise if lower volume
is desired.
PRE shows you the master volume with a range from -80 dB to
+10 dB in the display. This are real 1 dB-steps relatively to the input
signal. To adjust the volume-offset, please read „programming“
(page 4).
PRE has a soft input select function. Please press the input button at
the front panel to select one of the six inputs. PRE sequentially selects
the inputs from No. 1 to No. 6 on every touch. When changing the
input, PRE regulates volume down to -80 dB, mutes the outputs,
switches the inputs, activates the outputs and finally regulates volume
up to the level before. How to change the sequence of inputs please
read „programming“ (page 4).
PRE has a soft mute function. If desired or necessary to mute PRE,
please press the
mute button at the front panel.
When muting, PRE regulates volume down to -80 dB and then
switches off the outputs. If you press the mute button again, PRE
activates the outputs and regulates the volume up to the level before.
If you change the inputs in the muted state, please press the mute
button again as before. In this case the volume level will stay at -80
dB. Now you have to set the volume with the volume knob. This is
provided to protect you from unexpected levels of signal-sources,
which may be much louder as the one before.
PRE is programmable for functions providing you with new and easy
possibilities to adjust the system to your needs.. All individual settings
will be remembered, also when PRE will be switched off the mains.
You can programme the following:
*
The balance can be adjusted due to individual conditions
Switching on and
off in the stand by
state
Setting the volume
level
Selecting the
inputs
Muting
Programming