8
The programming ignition sequence is entered pressing the
monitor/set
button longer than one second.
For programming, please do the following:
1. Push the
monitor/set
button once for at least one second.
2. Now you are enabled to adjust the stereo balance of your system.
Turning the volume knob clockwise decreases the level of the left
channel, turning counter clockwise will decrease the right channel
’
s
level. The level of every stereo channel can be decreased up to
9 * 1 dB. The setting is displayed numerically and a symbol.
3. To leave the programming mode, push the
monitor/set
a short time.
Alternatively you can proceed adjusting to the next step with another
long keypress (go on with (3) in this case):
1. Select the channel to be adjusted
2. Push the set button twice for longer than one second. The display
shows you the channel number and
“
offset adjust
”
.
3. Turn the volume knob to adjust the desired channel level. This is pos-
sible within a range of +/- 9 * 1 dB to the master volume
4. To leave the programming mode, push the
monitor/set
a short time.
Alternatively you can proceed adjusting to the next step with another
long keypress (go on with (3) in this case):
1. Select the channel to be given a new name
2. Push the set button twice for at least one second. The display changes
to
“
Text
”
adjustment.
3. For individual naming there are 14 characters per input channel and 12
characters for the monitor loop available. A cursor indicates the cur-
rent character to be edited. Turn the input switch to move the cursor
in the appropriate direction. Select a character from a character set
consisting of letter, numbers and symbols by turning the volume knob.
4. To leave the programming mode, push the
monitor/set
a short time.
Alternatively you can proceed adjusting to the next step with another
long keypress (go on with (2) in this case):
Balance
Volume offset
Name programming
