6
Operating the system
All functions of your PRE 1 G2 are completely microprocessor con-
trolled. This guarantees highest precision, exclusive functions, easy opera-
tion and protection against operational faults.
For switching on your PRE 1 G2, please press the
power
button at the
front panel. The PRE 1 G2 needs 5 seconds for waking up and then
works.
To switch off the PRE 1 G2, please press the
power
button again and the
PRE 1 G2 needs 5 seconds again for going to sleep storing all your latest
settings.
To set the desired volume, please turn the
volume
knob at the front panel.
Please turn clockwise if higher and counterclockwise if lower volume is
desired.
The PRE 1 G2 shows you the master volume with a range of 86 dB. This
corresponds to -80 dB to +6 dB. At 0 dB the amplitudes of input and
output signal are equal. To adjust the volume offset for each separate
channel, please read
“
programming
”
below.
The volume knob is an incremental impulse unit without a stop.
Please turn the
input
button at the front panel to select one of the seven
inputs. The PRE 1 G2 sequentially selects the inputs from No. 1 to No. 6.
When changing the input, the PRE 1 G2 regulates the volume down to -
80 dB, mutes the outputs, switches the inputs, activates the outputs and
finally regulates volume up to the level before.
Switching on and off in the
stand by state
Setting the volume level
Selecting the inputs
