Audionet DNC, Руководство пользователя

Страница: 45 / 74

45
8.3.1.2 Save & Apply Settings
You have to select this option every time you finished the network con-
figuration and want to save and apply the new values. Any changes made
to your network setup will be dismissed without saving and applying
unless you select this particular option.
Select this menu option and confirm your selection with
set
or
OK
. It
takes about 30 seconds for the driver to restart. Then your Audionet de-
vice will be available in the network again.
Note
·
You have to execute this menu option if you want to save and apply
your latest changes to the network settings. Otherwise, your configu-
ration will be dismissed!
8.3.1.3 Load Factory Defaults
This function allows you to restore the factory settings of your DNC's
network driver. The DNC is factory-set to wired Ethernet connection with
DHCP activated. This way, if you connect your device to a wired net-
work, it should be ready to use.
Select this menu option and confirm your selection
set
or
OK
. The DNC
loads now the factory default settings.
After successfully loading the factory defaults, the cursor automatically
marks the menu item Save & Apply Settings. You must execute this
menu item as described in section
"8.3.1.2 - Save & Apply Settings" on
page 45 to apply the factory defaults.
Note
·
You have to execute menu item
Save and Apply Settings
if
you want to save and apply the factory default settings. Otherwise,
this configuration will be dismissed!
·
If you accidentally selected this option and the factory default set-
tings are loaded, you are able to exit the menu with the key
ä
of your
Audionet Metal Remote Control RC 2 or by holding down the
set
key
for longer than 2 seconds. This way the settings accidentally loaded
will not be activated and your previous settings will remain.