43
8.3
Network setup
Your DNC is set to receive DHCP
*
information from your network. If
you connect your device to a wired network, it should be ready to use.
For use of fixed IP address, you may contact your network administrator
to get the information you need to setup the DNC correctly for your net-
work.
Use keys
up
/
down
on the front panel or keys
▲
/
▼
of the Audionet
Metal Remote Control
RC 2
to alter the character marked by the cursor.
Press and hold
set
for longer than 2 seconds or press key
►
to move the
cursor one position to the right. Key
◄
moves the cursor one position to
the left. To erase the character marked by the cursor use key
O
. To finish
editing, press
set
or
OK
.
Note
·
You will find a step-by-step example for network configuration at the
end of the section (see section:
"8.3.10 - Example for Network
setup" on page 56
).
·
Most network related terms are defined in glossary (see section:
"9.1 - Glossary" on page 64
).
*
see section:
"9.1 - Glossary" on page 76
Key icon
Marker
Network adjust-
ment
Marker
position
►
Network Profile
◄
DHCP
IP Address
1 of 8
Содержание DNC
Страница 1: ...audionet DNC Digital Network Client User s Manual ...
Страница 2: ......
Страница 6: ......
Страница 9: ...9 2 Overview front panel power key A USB set key up key down key IR remote control receiver Display ...