Audionet AMP 1 V2, Руководство пользователя

Страница: 8 / 18

8
4 Installation and power supply
Important
·
For connecting or removing loudspeakers and/or the pre-
amplifier your AMP1 V2 must be switched off to prevent damage
to the amplifier or the connected units.
·
Please make sure that all cables are in absolute best conditions!
Broken shields or short-cut loudspeaker cables could damage
speakers and/or amplifiers.
4.1 Placement
The compact design of the AMP1 V2 requires the unobstructed heat dis-
sipation during operation. Please mind the following security notes:
Important
·
Please find a place for your Audionet AMP1 V2 that is sufficiently
ventilated to allow the heat to dissipate.
·
Do not expose the unit to direct sunlight or in close range to heat
sources like radiators or fan heaters.
·
Do not cover the ventilation slots of the unit.
4.2 Mains connection
The mains input 5
*
is on the back panel of the AMP1 V2. To connect
the unit to mains use the included cord. If you prefer to use a different
power cord make sure they meet the specifications for your home coun-
try.
Important
·
The electrical specifications of your home country must meet the
electrical specifications printed onto the back panel.
·
The AMP1 V2 is a Class I unit and must be earthed. Please ensure a
stable earth connection. The Phase ('hot' pin) is marked '
PHASE ' 6
on the back panel for the mains input.
*
see numbers in section ' Back panel ' on page 7