Audion Elektro D 552 AVT, Руководство пользователя

Страница: 37 / 59

Maintenance 36
7.9 Adjusting the pressing force of the cooling plates
The cooling plates are adjusted as follows:
Turn to the left to increase the pressing force and to the right to
reduce it.
Note that the adjustment depends on the position (horizontal or
vertical) of the housing.
7.10 Adjusting the pressing force of the after-press rollers
The cooling plates are adjusted as follows:
Turn to the left to increase the pressing force and to the right to
reduce it.
Note that the adjustment depends on the position (horizontal or
vertical) of the housing.
1. Turn the setting nut to adjust the
pressing force.
Try to keep the pressing force down
as far as possible so as to minimise
wear and tear on the PTFE belts.
If necessary, the pressure may be
increased for materials that are
difficult to seal. Always check
whether the bag is not blocked or
stuck during sealing.
1. Turn the setting nut to adjust the
pressing force.
Try to keep the pressing force down
as far as possible so as to minimise
wear and tear on the PTFE belts.
If necessary, the pressure may be
increased for materials that are
difficult to seal. Always check
whether the bag is not blocked or
stuck during sealing.