Audiomatica Qcbox 5, Руководство пользователя

Страница: 22 / 22

13 - INTERNAL SETTINGS AND TROUBLESHOOTING
If you want to make one of the possible internal settings disconnect the unit from
the mains power and then carefully open the unit; locate SW2 from the figure below
and make the appropriate selection. It is possible, using the dip switch SW2, to select
a phantom power supply on each input separately. When a switch is ON the phantom
power is present at that input.
Jumper J17 - If present input 3 is DC coupled
Jumper J18 - If present input 4 is DC coupled
Jumper J21 - If present the power amplifier input is DC coupled
Default factory settings are phantom power on inputs 1 and 2, input 3 and 4 DC
coupled and power amplifier AC coupled (J21 not present).
SW2
J17
J18
J21
22