23
TELEPHONE 39G CLIP INSTALLATION
2.4 WALL
MOUNTING
Your
AUDIOLINE TELEPHONE 39G CLIP
is also suitable for wall
mounting. Use the two screws for fixing it to the wall. Drill two holes 83
mm apart and leave the screws protruding 5 mm from the wall. Now place
the telephone over the screws and push down slightly.
2.5
HEARING AID COMPATIBLE
The telephone has a special circuit working on the basis of induction for
transmitting speech to hearing aids. Please set your hearing aid to T.
2.6 T-NET
SET-UP
Your
AUDIOLINE TELEPHONE 39G CLIP
supports the most important
DEUTSCHE TELEKOM added value functions (e.g. brokering, call
waiting, three-way conference, etc.). For these, you will need the FLASH
setting on your telephone. More information can be found in item 5.
Please contact DEUTSCHE TELEKOM to gain access to these functions
(some of which are subject to charge).
2.7
ADJUSTING THE DISPLAY CONTRAST
The display contrast can be adjusted in three steps by means of the
CONTRAST slide switch on the right-hand side.
2.8
PROGRAMMING STANDARD SETTINGS
Before you can use your telephone, it is necessary to make certain
settings. Telephone numbers are always shown in the display with the
local dialling code or, in the case of international calls, also with the
appropriate country code. If these numbers are dialled directly from the
caller list, the dialling code can of course be omitted with local calls.
Therefore, you should enter your local dialling code and the country code
for Germany (0049). Moreover, you can also enter the date and time at
this point. Please follow the instructions below:
1. Press and hold the
and
buttons for 4 seconds.
2. The display will show -----, local dialling code. Now enter your local
dialling code with a maximum of 5 digits using the number pad.
All manuals and user guides at all-guides.com
