− Base Station Settings −
86
14.4
Setting the recall time
Two recall times are available for selection, Recall 1" (100 ms) or Recall 2" (300 ms). A recall
time of 100 ms is required for operation in private branch exchanges. The T−Net provided by
Deutsche Telekom, for example, operates with a recall time of 300 ms.
1. Press the
button.
2. Use the
or
button to select the Base settings" option in the display.
3. Press the
button. Several options appear in the display.
4. Use the
or
button to select the Recall Mode" option.
5. Press the
button. Two recall times appear in the display for selection.
6. Use the
or
button to select recall time Recall 1" (100 ms ) or
Recall 2" (300 ms).
7. Press the
button. The assignment is confirmed in the display.
8. Press the
button to move back one menu level at a time.
14.5
Changing the system PIN
1. Press the
button.
2. Use the
or
button to select the Base settings" option in the display.
3. Press the
button. Several options appear in the display.
4. Use the
or
button to select the System PIN" option.
5. Press the
button. The message Enter old PIN" appears in the display.
6. Enter the old PIN (default setting: 0000). A
*
" appears in the display instead of the
number actually entered. If you enter an incorrect digit, delete it by pressing the
button.
7. When the old PIN has been correctly entered, press the
button. The message
Enter new PIN" appears.
8. Enter a new PIN (max. 8 digits possible).
9. Press the
button. The message Confirm new PIN" appears.
10. Enter the new PIN once again.
11. Press the
button. The assignment is confirmed in the display.
12. Press the
button to move back one menu level at a time.
NOTE:
If you forget your PIN code, it can only be reset with the aid of our Service Hotline.
For information on our Service−Hotline, please refer to the back cover of the
operating manual.