− SMS Text Messages −
67
Two call numbers for the SMS function must be programmed in the handset. One phone
number for sending and one phone number for receiving text messages. If you want to use the
services offered by another provider, the respective call number(s) must be programmed in the
handset. Proceed as described in 9.1.1.
NOTE:
The registering procedure for the various providers differs. Please contact the
provider of your choice for the necessary call numbers of the centres and the
procedure for enabling the SMS service.
9.1.1
Entering the send/receive centre numbers
1. Press the
button.
2. Use the
or
button to select the SMS" option in the display.
3. Press the
button.
4. Use the
or
button to select the Settings" option in the display.
5. Press the
button.
6. Use the
or
button to select the Service Centres" option in the display.
7. Press the
button.
8. Use the
or
button to select the "Receive Centre" option in the display. Enter the
phone number stipulated by the provider of your choice.
9. Press the
button.
10. Use the
or
button to select the Sending Centre" option in the display. Enter
the phone number stipulated by the provider of your choice.
11. Press the
button.
12. Press the
button to move back one menu level at a time.
9.2
Writing and sending
NOTE:
It is not possible to send an SMS message from a PABX system. The PABX Access
Code" must be deactivated in order to send an SMS message (refer to Chapter
11.7).
1. Press the
button.
2. Use the
or
button to select the SMS" option in the display.
3. Press the
button.
4. Use the
or
button to select the Write Message" option in the display.
5. Press the
button. Enter the text using the digit keys. A maximum of 160
characters are possible.
NOTE:
Refer to 8.1.1 to enter text.
NOTE:
To enter a symbol, press the
button while entering the text. Use the
or
button to select the Insert Symbol" option in the display. Press the
button. Use
the
or
button to select the required symbol. Press the
button. The text
entry display reappears. Carry on entering your text.
6. Press the
button.
7. Use the
or
button to select the Send to" option in the display.