AUDIOLINE DECT5500, Руководство по эксплуатации

Страница: 44 / 72

- Normal Use -
44
3. Normal use
3.1 The display
In normal operation, the display shows the name of the handset. The default name can
be changed at any time; see 7.8.
The display also gives a symbolic display of all the main functions.
Steady: You are making (or taking) a call.
Blinking: There is an incoming call and the connection with the base station is
being established.
Steady: You are making (or taking) an external call.
Blinking: There is an incoming external call.
Steady: You are making (or taking) an internal call.
Blinking: There is an incoming internal call.
Steady: A conference call has been set up.
Steady: You are in the callers (CLIP) list.
Blinking: New calls have been stored in the CLIP list.
Blinking: Batteries low. Please recharge handset.
Steady: Indicates battery charge level.
Steady: Shows phonebook is in use.
Steady: Shows programming has been activated.
3.2 Taking calls
If you receive an incoming call, both the handset and the base station will emit a ring
tone. Because of the time required to establish a connection, the handset rings slightly
later than the base station.
Notice: While the handset is ringing you can use the and buttons to adjust the
ring volume.
The EXT indication in the display will blink. Press the call button,
,
on the handset to
take the call. The call indicator on the base station will blink during the call.
To end the call, replace the handset on the base station or press the call button,
,
on
the handset.
You will find information on the display of telephone numbers in chapter 5.
When automatic answering is switched on, the call will be automatically taken as soon as
you lift the handset from the base station. To find out how to turn on the automatic
answering function, see chapter 7.6.