- Special functions -
45
8.2
Adjusting the base station ringer volume
The base station ringer volume can be adjusted in two steps or switched
off altogether.
PROGRAMMING STEPS
YOU WILL HEAR
1. Press
the button on
the base station until you
hear a signal and then
release.
You will hear the selected volume.
2. Repeat the process under
1.
After each step, you will hear the
selected volume. When the ringer is
switched off, you will hear two signal
tones.
8.3
Switching the button click on or off
Each time a button on the handset is pressed, this is confirmed with a
short signal tone (button click).
PROGRAMMING STEPS
DISPLAY
1. Press
the button.
Certain symbols will appear.
2. Press
the
button.
The current setting will be shown in the
display.
= button click off
= button click on
3. The button click can now
be switched on or off by
pressing the appropriate
button
0
or
.
= button click off
= button click on
4. Confirm
with and the
entries will be saved.